AEM 320 L/H Fuel Pump

  • Sale
  • $95


AEM’s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.

The AEM High Flow In-Tank Fuel Pump (PN 50-1000) flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Click on the flow curves and current draw vs. fuel pressure graphs below for more information.

CLICK HERE TO VIEW AEM HIGH FLOW IN-TANK FUEL PUMP APPLICATION GUIDE

AEM High Flow In-Tank Fuel Pump Features:

  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • In-Tank design
  • Tested to flow 320 lph @ 43 PSI
  • 39mm diameter fits most applications
  • Offset inlet design eases installation
  • Each pump individually tested
  • For gasoline vehicles (pump life may be diminished when used with E85 fuel)
  • Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead

AEM High Flow In-Tank Fuel Pump (PN 50-1000 & 50-1200) flow and power graph (in PSI). The data in this graph represents a 10 pump average of results collected in testing at AEM. Every AEM High Flow Fuel Pump is tested for flow, PRV activation, and amperage draw. The horsepower figures in this graph are approximate and will vary based on your vehicle’s set-up.The AEM 50-1000 & 50-1200 flows 320 lph at 43 PSI and has a low current draw even at 80 SPI due to its internal turbine pump design.

AEM High Flow In-Tank Fuel Pumps Flow vs Power Graph (Left) & Flow vs Pressure/Current (Right).


AEM High Flow In-Tank Fuel Pump Technical Drawing

AEM High Flow In-Tank Fuel Pump Technical Drawing