The products available on this site are intended for off highway use in sanctioned racing events only. Customer is responsible for observation of all federal, state, and local laws and statutes regarding legality of use. LMS-EFI LLC does not condone use of these products in a manner which does not comply with these laws.

ECUMaster ADU Display Dash and Logger Rev2

  • Sale
  • $1,429


Please note, a USB to CAN cable or equivalent is required to program the PMU.

The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.) and changed manually or automatically (based on an advanced conditions system). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified using user-friendly, Windows based software. Our comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independently of the actual page displayed.

FULLY CONFIGURABLE SEND AND RECEIVE CAN BUS ALLOWS DEVICE TO BE PROGRAMMED TO WORK WITH VIRTUALLY ANY ENGINE MANAGEMENT SYSTEM.

ADU7 AutoSport Advanced Display Unit with Logging

The ADU7 AutoSport Display is identical in specification to the regular ADU7, but features a 37 position AutoSport connector instead of the AMP connector on the original ADU7. AutoSport connectors are used in the highest tiers of motorsports and are the most compact and robust connector available. This connector uses a size 22 gold plated solid contact. Please ensure you have proper tooling available.

Specifications:

General:

Operating voltage:         6-22V, immunity to transients according to ISO 7637, with reverse polarity protection

CPU:                             32 bits, automotive, 90MIPS

Temperature range:       -30C to 80C

Enclosure:                     Anodized aluminium, CNC machined, IP65

Connector:                    Automotive 36-way AMP connector

5'' display:                    Antiglare TFT, 800x480, active area 108x64.8mm, luminance 600 cd/m2

7'' display:                    Antiglare TFT, 800x480, active area 154.08x85.92mm, luminance 500cd/m2

Alarms:                        15 x ultrabright RGB LEDs

 

Communication:

Can:                             2 x CAN 2.0B (250, 500, 1000 kbps) independent

Serial:                          RS232 (Rx, Tx)

USB:                            Yes, for data logging

 

Inputs:

Analogue:                     8 analogue inputs, 10 bits, 500Hz, software selectable pullups/pulldowns

Digital inputs:               8 inputs with user defined sensitivity

 

Outputs:

General purpose:           2 x protected 3A low side outputs

 

Other:

Accelerometer:              3 axis gyro and 3 axis acceleration

Light sensor:                 Built in for auto brightness

Temperature sensor:      Built in to trace device internal temperature

Real time clock:             Built in with battery backup

 

Features:

Lap timer:                     Lap timer with memory, predictive timing, triggered by a beacon or GPS

Customization:              48 available pages, user defined content, custom graphics allowed

Functions:                     Math channels + logical functions

Overlays:                      Yes, user defined

CAN stream:                 User defined, up to 48 input messages, predefined streams for popular ECUs

 

Logging:

Memory:                       USB Flash Memory

Rate:                            Up to 500Hz per channel

Real time clock:             Yes